Type 1 Systems

AQUA SOLUTIONS home page

AQUA SOLUTIONS Product Lines

Dare to Compare - Click here to compare us with the competition - Dare to Compare

AQUA SOLUTIONS' Compact Reverse Osmosis + Type I DI Systems.

AQUA SOLUTIONS' Compact Reverse Osmosis + Type I DI Systems combine a 10-Liter/Hour Reverse Osmosis (RO) pretreatment system with an Analytical, Biological, Ultra-Low TOC, or Low TOC Biological Grade Type I DI System, all enclosed in a single cabinet design.

These systems measure just 20" wide x 20" high x 12"deep, and come with a pressurized 42-Liter RO Storage Tank.

The systems produce 2-3 Liters/Minute of purified water that meets ASTM, CAP and NCCLS specifications for Type I water.

Analytical and Biological Grade Systems are available with or without a built-in ultraviolet (UV) sterilizer to control the growth of microorganisms within the system.

AQUA SOLUTIONS' Compact RO+DI Systems should be considered whenever:

Incoming tap water contains more than 170 ppm of total dissolved solids, and/or
Type I purified water usage exceeds 20-Liters/Day or 100-Liters/Week.

Under these conditions, compact RO+DI systems can produce better quality water, at lower cost, than systems that don't have built-in RO pretreatment. They are ideally suited for those applications where the existing pretreatment system is either unreliable, overloaded, or non-existent. in addition, they are also suitable for installations where either space or funding limitations preclude purchasing a separate RO pretreatment system, since they are very competitively priced!

Features and Benefits:

Built-in, 10-Liter/Hour RO pretreatment system

Fully automatic operation and complete instrumentation

18-megohm-cm Type I Reagent Grade Water at 50-100 ppb TOC

Continuous recirculation ensures superior water quality at all times

Highest flow rate (3-Liters per Minute) of any comparably sized system

Highest ion exchange capacity (2,000 grains) of any comparable system

Built-in activated carbon prefilter reduces particulates & organics for longer DI module life

Digital, temperature-compensated resistivity monitor with red/green LED alarms

Teflon recirculating remote dispenser with 0.10 µm final filter capsule

System can be bench, shelf or wall-mounted at no extra charge

Two (2) year system warranty (US & Canada only)

AQUA SOLUTIONS' RO+DI Systems - Available Models

Model RODI-C-12A Combination RO + Analytical Grade Type I DI System is designed for operation on tap water containing up to 1,000+ ppm of total dissolved solids. It requires purification kit number 2613M1T-A.
Model RODI-C-12AU Combination RO + Analytical Grade Type I DI System is designed for operation on tap water containing up to 1,000+ ppm of total dissolved solids. It includes a built-in ultraviolet (UV) sterilizer to control the growth of microorganisms within the system. It requires purification kit number 2613M1T-A.

Note: Models RODI-C-12B and RODI-C-12BU (listed below) include a built-in 5,000 MWCO ultrafilter to
provide a 4-6 log reduction of pyrogen/endotoxin, resulting in Type I water that is pyrogen and endotoxin free.

Model RODI-C-12B Combination RO + Biological Grade Type I DI System is designed for operation on tap water containing up to 1,000+ ppm of total dissolved solids. It requires purification kit number 2613M1T-A.
Model RODI-C-12BU Combination RO + Biological Grade Type I DI System is designed for operation on tap water containing up to 1,000+ ppm of total dissolved solids. It includes a built-in ultraviolet (UV) sterilizer to control the growth of microorganisms within the system. It requires purification kit number 2613M1T-A.

Note: Models RODI-C-12AL and RODI-C-12BL (listed below) include a built-in ultraviolet (UV) oxidizer/sterilizer to
reduce TOC to the lowest possible levels.

Model RODI-C-12BL also includes a 5,000 MWCO ultrafilter to provide a 4-6 log reduction pyrogen/endotoxin,
resulting in Type I water that is pyrogen and endotoxin free, and has no RNase or DNase activity.

Model RODI-C-12AL Combination RO + Ultra-Low TOC Analytical Grade Type I DI System is designed for operation on tap water containing up to 1,000+ ppm of total dissolved solids. It requires purification kit number 2613M1L-A.
Model RODI-C-12BL Combination RO + Ultra-Low TOC Biological Grade Type I DI System is designed for operation on tap water containing up to 1,000+ ppm of total dissolved solids. It requires purification kit number 2613M1L-A.